Hi folks, i do use a redpitaya with pavel Alpine software for WSPR
the Wifi network has a SSID : H&H3
i do login to the redpitaya with PUTTY
i give then the command: wpa_passphrase H&H3 henk5 > /etc/wpa_supplicant/wpa_supplicant.conf
then i get: -ash: H3 not found
so I think the & character is forbidden.....
i may not change the SSID of that network.
So, how can i solve this problem?
Wim PA0SLT
i can not login in a Wifi with SSID H&H3
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: i can not login in a Wifi with SSID H&H3
Hi Wim,
thank you for your question.
Pavel Demin is a person independent of Red Pitaya team, that developed an operating system that works with the Red Pitaya board.
This can happen because we provide the hardware and our own software, and because it is an open source platform, third parties like Pavel Demin can also make applications.
For these third parties we cannot actually provide support.
We kindly suggest you to contact Pavel with this topic.
thank you for your question.
Pavel Demin is a person independent of Red Pitaya team, that developed an operating system that works with the Red Pitaya board.
This can happen because we provide the hardware and our own software, and because it is an open source platform, third parties like Pavel Demin can also make applications.
For these third parties we cannot actually provide support.
We kindly suggest you to contact Pavel with this topic.
-
- Posts: 799
- Joined: Sat May 23, 2015 5:22 pm
Re: i can not login in a Wifi with SSID H&H3
One of the following commands should do the job:
Code: Select all
wpa_passphrase 'H&H3' henk5
wpa_passphrase H\&H3 henk5
-
- Posts: 14
- Joined: Mon Aug 12, 2019 12:46 pm
Re: i can not login in a Wifi with SSID H&H3
Hi Pavel,
Thanks for your reply.
I tried 'H&H3' and it worked nice, i believe.
it was written in de wpa_supplicant.conf file.
So it looks good.
tomorow i go to the location where H&H3 is active.
So hoping it will work.
i do use it for a remote WSPR receiving station ( PA0SLT/A) at 90 Km from my house.
anyhow,, you made a very nice program/system for the redpitaya,
it is very nice to have 8 whisper receivers now at one location which i
can use for all my experiments. Thank you very much!!!
Yours
Wim PA0SLT
Thanks for your reply.
I tried 'H&H3' and it worked nice, i believe.
it was written in de wpa_supplicant.conf file.
So it looks good.
tomorow i go to the location where H&H3 is active.
So hoping it will work.
i do use it for a remote WSPR receiving station ( PA0SLT/A) at 90 Km from my house.
anyhow,, you made a very nice program/system for the redpitaya,
it is very nice to have 8 whisper receivers now at one location which i
can use for all my experiments. Thank you very much!!!
Yours
Wim PA0SLT
-
- Posts: 14
- Joined: Mon Aug 12, 2019 12:46 pm
Re: i can not login in a Wifi with SSID H&H3
Hi Redpitaya,
Thanks for your reply.
As you see Pavel himself solved my problem.
thanks i am very glad to use this forum!
Wim
Thanks for your reply.
As you see Pavel himself solved my problem.
thanks i am very glad to use this forum!
Wim
-
- Posts: 14
- Joined: Mon Aug 12, 2019 12:46 pm
Re: i can not login in a Wifi with SSID H&H3
Pavel,
thank you very much again for your info.
'H&H3' is working OK, the redpitaya is running like a charm now!
So, problem solved.
73
Wim PA0SLT
thank you very much again for your info.
'H&H3' is working OK, the redpitaya is running like a charm now!
So, problem solved.
73
Wim PA0SLT
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 48 guests