Connection via internet

Just about everything about Red Pitaya
Post Reply
sv1gyk
Posts: 1
Joined: Fri Dec 04, 2020 8:59 am

Connection via internet

Post by sv1gyk » Sat Dec 05, 2020 11:22 am

Hi everyone Im new on this forum and I have intension to buy the SDR transceiver kit basic( STEMlab-125-14).
My project is to make an istallation to my holiday home and remotely (via internet) from my office to have full access with power sdr software.
My question is how much bandwidth must have on my holiday home because i have very low speed from my provider.
Minimum requirements line upload for use without problems?
Please Advice. :)

User avatar
redpitaya
Site Admin
Posts: 876
Joined: Wed Mar 26, 2014 7:04 pm

Re: Connection via internet

Post by redpitaya » Thu Mar 18, 2021 9:33 am

well, it will depend on what exactly are you using on the device.
I suggest to make a test at home and do some typical operations while you measure the bandwidth using wireshark.
Here is the instructions on how to measure the used network bandwidth:
https://blog.davidvassallo.me/2010/03/2 ... wireshark/

I strongly suggest to put the Red Pitaya behind a router that you can configure a VPN on in order to have proper security for it.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 5 guests