Hello,
does anybody got some experience of pinging by windows cmd? I want to qualify RP's connection to a PC. Connection is done by a LAN cable directly, the connection works, but when I apply a ping with the choosen IP 192.168.0.15 , then I get messages that target is not accessible. I hope somebody can help. Thank you.
Dieter
Ping to RP via direct LAN
-
- Posts: 115
- Joined: Fri Jan 09, 2015 6:07 pm
- Location: Babenhausen/Germany
-
- Posts: 3
- Joined: Mon Dec 14, 2020 4:46 pm
Re: Ping to RP via direct LAN
Hi Dieter,
It works for me when I use "ping" followed by IP address in windows cmd, with the host IP set statically.
I use v0.95, my RP IP is set to 192.168.1.100, and my PC (static) IP is set to 192.168.1.101
Ilemona
It works for me when I use "ping" followed by IP address in windows cmd, with the host IP set statically.
I use v0.95, my RP IP is set to 192.168.1.100, and my PC (static) IP is set to 192.168.1.101
Ilemona
-
- Posts: 115
- Joined: Fri Jan 09, 2015 6:07 pm
- Location: Babenhausen/Germany
Re: Ping to RP via direct LAN
Hello Ilemona,
thanks very much, I had some success:
C:\Users\Dieter>ping 192.168.1.100
Ping wird ausgeführt für 192.168.1.100 mit 32 Bytes Daten:
Antwort von 192.168.1.100: Bytes=32 Zeit=1ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit=199ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit<1ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit<1ms TTL=64
Ping-Statistik für 192.168.1.100:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
(0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 0ms, Maximum = 199ms, Mittelwert = 50ms
I took the same IPs like you, other than it was before. It took some time to setup the IP for the LAN, but finally it worked. The background is an EMC project for a different device than RP, but RP is my first probe to test the pinging generally.
Thanks again, and have a Happy New Year.
Dieter
thanks very much, I had some success:
C:\Users\Dieter>ping 192.168.1.100
Ping wird ausgeführt für 192.168.1.100 mit 32 Bytes Daten:
Antwort von 192.168.1.100: Bytes=32 Zeit=1ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit=199ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit<1ms TTL=64
Antwort von 192.168.1.100: Bytes=32 Zeit<1ms TTL=64
Ping-Statistik für 192.168.1.100:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
(0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 0ms, Maximum = 199ms, Mittelwert = 50ms
I took the same IPs like you, other than it was before. It took some time to setup the IP for the LAN, but finally it worked. The background is an EMC project for a different device than RP, but RP is my first probe to test the pinging generally.
Thanks again, and have a Happy New Year.
Dieter
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 79 guests