oscilloscope 122 16 bad mesurements ?

Just about everything about Red Pitaya
Post Reply
chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

oscilloscope 122 16 bad mesurements ?

Post by chrisdgy » Thu Apr 01, 2021 4:17 pm

Hello guys, well here I wanted to start to learn a little to use an oscilloscope and the red pitaya is therefore perfect for that but then I do my first attempts just to send 200mv out one or 2 of the rdp 16 and with a piece of cable I come on output 1 or 2 and I therefore expected to find around 200 mv as what the generator sends but I barely measure 40 mv on the signal from the oscilloscope rdp 16 I changed port 1 or 2 and it is always the same and I also changed the port on the generator and it is also the case in any case never of measurement close to my 200mv is this normal ?? can be a calibration to be done how can we do the calibration on the 122/16 ?? I tried several connecting cables but identical!

thank for help

User avatar
redpitaya
Site Admin
Posts: 876
Joined: Wed Mar 26, 2014 7:04 pm

Re: oscilloscope 122 16 bad mesurements ?

Post by redpitaya » Fri Apr 16, 2021 11:35 am

What is the frequency?
Can it be because there is No DC coupling ?
Please note that the minimum RF Input frequency at -3dB: 300kHz

The 16 bit board was designed specially for HAM radio operators.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 4 guests