Page 1 of 1

STEMLAB 125-14 only orange LED on

Posted: Tue Aug 31, 2021 5:46 pm
by rdubroeu
Hi everyone,

So i was using a STEMLAB 125-14 and feeding a sine wave output to a AD620 amplifier (I want to amplify the Redpitaya signal from 2 Vpp to 10 Vpp at least).

But after some time, the board stopped working. Now there is only the orange LED, all the other ones are off.

I didn't match the output impedance of the board to the high input impedance of the AD620.

Did I just kill my board because of an impedance mismatch ? Could the reflection do that ? The signal generated from the board at the time was a sine wave of 1 Vpp and 1kHz.

Thanks for your help !

Re: STEMLAB 125-14 only orange LED on

Posted: Fri Oct 01, 2021 11:26 am
by redpitaya
Unfortunately that is a possibility however to make sure,
Please let me know if the issue is manifesting after you manually update the Red Pitaya OS to the latest BETA by using this guide:
https://www.youtube.com/watch?v=Qq_YRv2nk3c