Hello,
I am new to Redpitaya. I use a 125-14 Red Pitaya Kit.
I tried to follow this steps:
1.3.2.2. Make a FPGA project
Go to the downloaded ZIP location and extract it. You will enter the fpga folder and make a Vivado project. Open a Terminal and input the following commands.
cd Downloads/
cd RedPitaya/
cd fpga/
. /opt/Xilinx/Vivado/2020.1/settings64.sh
make project PRJ=v0.94 MODEL=Z10
What is the project and the model number for Redpitaya 125-14?
Could you pkease help me out?
Afternoons
project number and Model number
-
- Posts: 120
- Joined: Tue Nov 16, 2021 11:38 am
Re: project number and Model number
Hi,
projects and build flags are listed here:
https://redpitaya.readthedocs.io/en/lat ... ng-process
In your case, if you want to build the "regular" ADC/DAC oscilloscope image, you can enter
make PRJ=v0.94
or, if you want to be more specific
make PRJ=v0.94 MODEL=Z10
The Makefile defaults to building Z10 (which includes 125-10 and 125-14).
projects and build flags are listed here:
https://redpitaya.readthedocs.io/en/lat ... ng-process
In your case, if you want to build the "regular" ADC/DAC oscilloscope image, you can enter
make PRJ=v0.94
or, if you want to be more specific
make PRJ=v0.94 MODEL=Z10
The Makefile defaults to building Z10 (which includes 125-10 and 125-14).
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 12 guests