How to download SDR APP

[pavel]

I would say that this error indicates that the application is not started on the Red Pitaya board. Do you start the SDR transceiver application via the web interface?

[lfpy]

I used IP connection to open the sdr transceiver on a Linux browser, and then entered the corresponding instructions according to the instructions on Linux, but still reported an error

[pavel]

It is not easy for me to analyze the problem with this little information. Could you send me a screenshot showing a web browser with the web interface of the board that you are using to start the SDR transceiver application and the GNU Radio Companion window showing all the blocks?

[lfpy]

These are my screenshots

[pavel]

Thank you for the screenshot.

The IP address 169.254.153.22 seems strange. If I am not mistaken, this type of IP address does not work with the SD card image from my instructions.

Have you verified that this is the same IP address that you are using to access the board's web interface?

[lfpy]

I just changed the IP address according to what you said. Our Redpitaya IP address is 169.254.153.22. However, after trying to change the IP address on GNU to be the same as Redpitaya, this situation still occurs. Here is my screenshot. Could you please take a look at what the problem is.