The FPGA code for RedPitaya Oscilloscope application

[ntu_r09222078]

Hi everyone! I am a complete novice in FPGA and embedded system so please forgive me if my question seems elementary.
My laboratory recently bought a STEMlab 125-14 4 input red pitaya board and would like to use it for pulse height analysing purpose. Pavel's MCPHA fits the purpose well, but I was told that his application does not run on our specific board, so I will have to find an alternative.

I tried the LED blinker example and it worked. So my guess is that for there might exist a similar project for the "Oscilloscope" project as well, where I can find codes and IP designs for the oscilloscope application and make some changes to it. However, I tried searching on Google and have no luck. Can anyone point me to the project code? Or it is confidential?
I imagine it can be launch by the "make project PRJ=v0.94 MODEL=Z20_4" command or similar?
Thank you!

[juretrn]

All of the Red Pitaya FPGA code is available on our GitHub.
https://github.com/RedPitaya/RedPitaya-FPGA

more specifically, the oscilloscope app sources are available here:
https://github.com/RedPitaya/RedPitaya- ... /prj/v0.94

and here:
https://github.com/RedPitaya/RedPitaya- ... tl/classic

For your board, this command will open all of the sources in Vivado's GUI.

Code: Select all

make project PRJ=v0.94 MODEL=Z20_4