Hi!
I am only getting ~155 Mb/s write speed from the USB port on the RedPitaya. Is it not possible to get somewhere close to the full 480 Mb/s of USB 2.0 on the RedPitaya? What USB PHY is used on the board?
I am using Petalinux. Could it be that I am missing some setting?
Any input would be appreciated!
Thank you
USB high speed 480 mb/s possible?
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: USB high speed 480 mb/s possible?
Hello std_logic,
I will check with the team and let you know.
I will check with the team and let you know.
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: USB high speed 480 mb/s possible?
The USB PHY manufacturer number is:
USB3320C-EZK
USB3320C-EZK
-
- Posts: 5
- Joined: Sat Jan 07, 2023 4:50 pm
Re: USB high speed 480 mb/s possible?
Thanks alot!
Theoretically it should all be capable of 480 Mb/s or 60 MB/s.
But even here on the Xilinx page only 25 MB/s are given as an example in host mode. Could of course be a limitation of the USB device in their case, who knows.
https://xilinx-wiki.atlassian.net/wiki/ ... ice+Driver
Theoretically it should all be capable of 480 Mb/s or 60 MB/s.
But even here on the Xilinx page only 25 MB/s are given as an example in host mode. Could of course be a limitation of the USB device in their case, who knows.
https://xilinx-wiki.atlassian.net/wiki/ ... ice+Driver
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 97 guests