Page 1 of 1
Use multiple RPs
Posted: Wed Jun 18, 2014 9:43 pm
by Dri7308
Can you use 2 or more RPs together and sync the 2 boards. In effect have a 4 channel system
Re: Use multiple RPs
Posted: Thu Jun 19, 2014 8:05 am
by Crt Valentincic
Would you like to sync. ADC clocks or only triggering of the acquisition?
Re: Use multiple RPs
Posted: Fri Jun 20, 2014 11:05 pm
by Dri7308
Triggers
Re: Use multiple RPs
Posted: Fri Jun 27, 2014 10:29 am
by redpitaya
If you already have an external trigger signal you could simply trigger the acquisition on both Red Pitayas simultaneously through external trigger input that is available on the extension connector. On the other hand it would be also possible to define triggering conditions (input, edge, threshold) on the first Red Pitaya and sync. it over SATA connector with second Red Pitaya. In such case the second Red Pitaya would probably have another trigger source called SATA or similar. This second feature would be the best solution I think, but unfortunately it is not yet implemented.