Use multiple RPs

Just about everything about Red Pitaya
Post Reply
Dri7308
Posts: 2
Joined: Wed Jun 18, 2014 9:37 pm

Use multiple RPs

Post by Dri7308 » Wed Jun 18, 2014 9:43 pm

Can you use 2 or more RPs together and sync the 2 boards. In effect have a 4 channel system

Crt Valentincic
Posts: 67
Joined: Wed May 28, 2014 12:15 pm

Re: Use multiple RPs

Post by Crt Valentincic » Thu Jun 19, 2014 8:05 am

Would you like to sync. ADC clocks or only triggering of the acquisition?

Dri7308
Posts: 2
Joined: Wed Jun 18, 2014 9:37 pm

Re: Use multiple RPs

Post by Dri7308 » Fri Jun 20, 2014 11:05 pm

Triggers

User avatar
redpitaya
Site Admin
Posts: 883
Joined: Wed Mar 26, 2014 7:04 pm

Re: Use multiple RPs

Post by redpitaya » Fri Jun 27, 2014 10:29 am

If you already have an external trigger signal you could simply trigger the acquisition on both Red Pitayas simultaneously through external trigger input that is available on the extension connector. On the other hand it would be also possible to define triggering conditions (input, edge, threshold) on the first Red Pitaya and sync. it over SATA connector with second Red Pitaya. In such case the second Red Pitaya would probably have another trigger source called SATA or similar. This second feature would be the best solution I think, but unfortunately it is not yet implemented.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 24 guests