Hello everyone!
I'm getting started with Red Pitaya and I test some webapps. The Oscilloscope works fine, but i have a problem with the signal generator. The Signal is a standard Sine with 500 Hz. The Amplitude is 2 Vpp. The intern Oscilloscope from Red Pitaya measured a Amplitude 0.025 Vpp.
I measured the same value with an extern Oscilloscope.
My Signal is at the end 40 dB to small.
This Problem is for both HF-Outputs.
Signal Generator Problem Low Level
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Signal Generator Problem Low Level
Hi,
When you click on drop down menu “Generate” and input amplitude value do you also select outputs to be on?
Regards
When you click on drop down menu “Generate” and input amplitude value do you also select outputs to be on?
Regards
-
- Posts: 4
- Joined: Mon Apr 13, 2015 12:51 pm
Re: Signal Generator Problem Low Level
Ok I solved the problem. It seems I have a Software Bug in my Web App.
I generate a test signal with my Terminal and it works. I measured a Signal with an amplitude of 2 Vpp.
Thank you for your fast response.
I generate a test signal with my Terminal and it works. I measured a Signal with an amplitude of 2 Vpp.
Thank you for your fast response.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 36 guests