RedPitaya Tango Control System Gateway
Posted: Wed Jul 08, 2015 12:52 pm
Hi team,
FYI, we have done a bridge to the Tango Control System for RedPitaya
more info here :
go to latest pages for a specific Redpitaya Device Server
there is a tango virtualbox image for quick tests and redpitaya binary bundle available
this is a proof of concept : accessing a minimal zynq design from the TANGO Distributed Control System
(we enroll in XUP OpenHardware 2015 Contest).
see http://www.tango-controls.org for more info on TANGO
Tango is a free, open source, distributed, scalable, efficient SCADA framework : a set of tools and API to monitor industrial appliance of any kinds...
Tango control system was elaborated at the ESRF, a large synchrotron radiation facility in Grenoble, France. The ESRF is a large research laboratory (1500 engineers, researchers, ), a kind of giant microscope to explore organic molecules or others and that uses X rays of high energy (6 GeV) issued from an 850 meters circumference accelerator in more than 40 beams lines operating simultaneously. More on the ESRF here
Tango Control System is a 100 man/years middleware, which aims at the monitoring 24/7 of more than 200 000 sensors & actuators in the facility. It features among other usage : logging, events driven communication, seamless integration to NI Labview, Matlab, Igor scientific toolboxes or OPC-UA plc, EPICS bus, ...
The SKA Telescope (square kilometre array telescope in southAfrica/Australia) will use TANGO.
But Tango can also fit in a raspberry pi or in a zynq SoC as RP !
thank you for reading
FYI, we have done a bridge to the Tango Control System for RedPitaya
more info here :
go to latest pages for a specific Redpitaya Device Server
there is a tango virtualbox image for quick tests and redpitaya binary bundle available
this is a proof of concept : accessing a minimal zynq design from the TANGO Distributed Control System
(we enroll in XUP OpenHardware 2015 Contest).
see http://www.tango-controls.org for more info on TANGO
Tango is a free, open source, distributed, scalable, efficient SCADA framework : a set of tools and API to monitor industrial appliance of any kinds...
Tango control system was elaborated at the ESRF, a large synchrotron radiation facility in Grenoble, France. The ESRF is a large research laboratory (1500 engineers, researchers, ), a kind of giant microscope to explore organic molecules or others and that uses X rays of high energy (6 GeV) issued from an 850 meters circumference accelerator in more than 40 beams lines operating simultaneously. More on the ESRF here
Tango Control System is a 100 man/years middleware, which aims at the monitoring 24/7 of more than 200 000 sensors & actuators in the facility. It features among other usage : logging, events driven communication, seamless integration to NI Labview, Matlab, Igor scientific toolboxes or OPC-UA plc, EPICS bus, ...
The SKA Telescope (square kilometre array telescope in southAfrica/Australia) will use TANGO.
But Tango can also fit in a raspberry pi or in a zynq SoC as RP !
thank you for reading