Page 1 of 1
Connection of external ADC clock
Posted: Fri Apr 29, 2016 2:16 pm
by Program
I think the drawing showing the positions of the R23, 24, 27, 28 resistors on the bottom of the RP board (
see here) is not quite accurate, at least not for the board that I have got (V1.1). In particular, I believe the redpitaya logo is not next to the six sockets where the resistors can be placed. Comparing the drawing to the layout of my board, I think the sockets are about one centimetre to the left of the fixing plug of the heatsink. Could someone confirm this?
Re: Connection of external ADC clock
Posted: Fri Apr 29, 2016 2:32 pm
by Nils Roos
Yes, the position of the RedPitaya logo has changed on the bottom silkscreen between 1.0 and 1.1.
The 6 pads 1cm ZYNQ-wards from the heatsink mounting hole are indeed for R23,24,27,28 .
Re: Connection of external ADC clock
Posted: Mon Sep 25, 2017 7:40 pm
by rbyoussef
Nils Roos wrote:Yes, the position of the RedPitaya logo has changed on the bottom silkscreen between 1.0 and 1.1.
The 6 pads 1cm ZYNQ-wards from the heatsink mounting hole are indeed for R23,24,27,28 .
Could you please specify which is which. I am particularly interested about the location of R27 and R28. Thank you.