RP122.88-16 DAC problem

Placement, modules, components and accessories; the ones that exist and the the nice-to-be's
Post Reply
ortariot
Posts: 2
Joined: Mon Jan 16, 2017 9:59 am

RP122.88-16 DAC problem

Post by ortariot » Thu Nov 19, 2020 3:59 pm

Hello!
For my hobby projects I learning zynq processor system.
I have RedPitaya board 122.88-16 model. For my task needs dac. I use axis_red_pitaya_dac_v2_0 ip core from Pavel Demin and this core works great with with my board when i send in data_in(s_axis_tdata) signal from generator or binary counter. On display my oscilloscope i see periodical signal. However when i send to data in constants from ip core or from gpio port i see on oscilloscope display one short pulse but I wont to see change output voltage level.

Also also i tried change verilog code of axis_red_pitaya_dac_v2_0 so that in out sends constant output level:

Code: Select all

//assign int_dat_a_wire = s_axis_tdata[DAC_DATA_WIDTH-1:0];
//assign int_dat_b_wire = s_axis_tdata[AXIS_TDATA_WIDTH/2+DAC_DATA_WIDTH-1:AXIS_TDATA_WIDTH/2];
  assign int_dat_a_wire = $signed(7000); // 14'b01111111111111
  assign int_dat_b_wire = $signed(5000); // 14'b01111111111111   
But the result is exactly the same as I described above - one short pulse.
Please tell me what possible problem there might be. Perhaps this is somehow related to ODDR?

pavel
Posts: 790
Joined: Sat May 23, 2015 5:22 pm

Re: RP122.88-16 DAC problem

Post by pavel » Thu Nov 19, 2020 6:25 pm

The 122.88-16 board have AC coupled inputs and outputs. DC signals are filtered out. So the 122.88-16 board can't be used to generate constant levels.

ortariot
Posts: 2
Joined: Mon Jan 16, 2017 9:59 am

Re: RP122.88-16 DAC problem

Post by ortariot » Sat Nov 21, 2020 8:15 pm

Thank you, I did not pay attention to it)) Although this is written everywhere, including the scheme shown.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 21 guests