Stem LAB SDR transceiver module

Placement, modules, components and accessories; the ones that exist and the the nice-to-be's
Post Reply
Pibo
Posts: 3
Joined: Thu Aug 22, 2019 3:01 pm

Stem LAB SDR transceiver module

Post by Pibo » Thu Dec 03, 2020 10:14 am

Hello all!

Can someone tell me why this module is not compatible with RP 122-16?

https://www.redpitaya.com/Catalog/p30/s ... e?cat=c102

Is it HW or SW problem?

Regards with respect!

Pibo S58WW

User avatar
redpitaya
Site Admin
Posts: 539
Joined: Wed Mar 26, 2014 7:04 pm

Re: Stem LAB SDR transceiver module

Post by redpitaya » Thu Mar 18, 2021 11:08 am

Definitely not for the SDRlab units.

They are not compatible because of input/output voltage ranges, impedance differences and also the filtering is not appropriate for the exchange.

Please note that the transceiver is compatible only with the 14 bit board. However the 16 bit SDRlab has been designed specially for SDR work in the sense that it has more dynamic range due to increased number of bits, bigger FPGA for more complex real time signal processing, noticeable increased noise performance, no more limiting filters on the inputs. You can use any power amplifier suitable for it, but unfortunately we do not have one at this moment. Please note that the SDRlab units do not have DC coupling; the low frequency starts at 300KHz. Also there is no application marketspace with it. All aps are included in the OS.

Pibo
Posts: 3
Joined: Thu Aug 22, 2019 3:01 pm

Re: Stem LAB SDR transceiver module

Post by Pibo » Thu Jul 08, 2021 6:48 pm

Hvala!

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 1 guest