Redpitaya Forum

Hi. I'm trying to follow this example design (https://github.com/dspsandbox/FPGA-Note ... A-transfer) to get started on SoC development on Red Pitaya. Unfortunately, all examples are for STEM Lab, and refer to board files for another board. Where can I find all the relevant board files for the 122-16? There is a closed topic on this forum, but the RedPitaya admin is referring to a dead link for the board files, and I haven't found anything more recent. Thanks

You can use the examples on our website as a reference, the only thing that changes for you is changing a setting when running the make_file.tcl script (change the model to "Z20" as in Zyng 7020 or replace a Z10 with Z20 in the files):
https://redpitaya-knowledge-base.readth ... ject-setup

https://redpitaya.readthedocs.io/en/lat ... ng-process

This means that you would run:
make project PRJ=v0.94 MODEL=Z20
instead of:
make project PRJ=v0.94 MODEL=Z10

What I'm trying to do is follow these examples : https://github.com/dspsandbox/FPGA-Note ... generation. They are centered around RedPitaya 125-14 board. I really like their tutorials because they show step-by-step creation of new SoC projects. As a part of project creation they use FPGA constraint files, such as red_pitaya.xdc, which used to be hosted under https://github.com/RedPitaya/RedPitaya/ ... pitaya.xdc. However, in the recent master repo structure of RedPitaya repo has changed significantly, and these constraint files can no longer be found. So my request is this: I need to have constraint files and board files for the 122-16 boards that would allow me to build a new SoC project in Vivado from scratch. Please point me to where these files are. Also, is the pinout of 125-14 Xilinx chip same as on 122-16? Can I just use constraint files (.xdc, for example) from 125-14 to generate 122-16 projects?

To continue my previous post, for example, here is a constraint file that exist under a different branch on RedPitaya repo: https://github.com/RedPitaya/RedPitaya/ ... pitaya.xdc. However, the file doesn't say which board it is for. Is it universal, i.e. is Xilix chip pinout for 125-14 same as for 122-16?