New to Redpitaya

Placement, modules, components and accessories; the ones that exist and the the nice-to-be's
kavilshah
Posts: 29
Joined: Thu Nov 27, 2014 5:21 am

Re: New to Redpitaya

Post by kavilshah » Wed Feb 18, 2015 6:15 am

Oops sorry...!!
and there was may be software error..
problems is solved..
and again sorry for inconveniency...

kavilshah
Posts: 29
Joined: Thu Nov 27, 2014 5:21 am

Re: New to Redpitaya

Post by kavilshah » Tue Feb 24, 2015 9:48 am

[attachment=0]error after acquire modifiacation.png

hey... again in problem..
here i have attached my errors...

what i have done is..
1)i have modified acquire.c..(trigger source = external andtrigger mode = normal),press build button and the binary file is created.. which is copied to the bin folder of the red pitaya. and aftee that signals are given to the redpitaya and by putty command(acquire utility) tried to acquire signal and i got this error (attached as 1).

2)after building up the project debug as 1 launch on hardware GDB i got the new problem..which is attached as 2.

can you please give me any help...
You do not have the required permissions to view the files attached to this post.

Nils Roos
Posts: 1441
Joined: Sat Jun 07, 2014 12:49 pm
Location: Königswinter

Re: New to Redpitaya

Post by Nils Roos » Tue Feb 24, 2015 9:33 pm

There is only one attachment to your post, which one is that ?
The output looks a lot like you are trying to run a textfile with a symbol table instead of an elf binary.

I have sent you a PM about how to proceed.

kavilshah
Posts: 29
Joined: Thu Nov 27, 2014 5:21 am

Re: New to Redpitaya

Post by kavilshah » Wed Feb 25, 2015 5:42 am

after debug.. 2 the error occurred hardware project missing " hardware project 'referenced by a launch configuration 'acquire(2)' doesn't exist in the work space "
You do not have the required permissions to view the files attached to this post.

kavilshah
Posts: 29
Joined: Thu Nov 27, 2014 5:21 am

Re: New to Redpitaya

Post by kavilshah » Thu Feb 26, 2015 9:27 am

hii....


Finally done...
I Got my result... i can modify the acquire program and i can find my binary which is copied to the bin folder of redpitaya...

Thank you so much Nils for the support....Thank you,.... :) :) :) :) :) :) :)

kcs
Posts: 1
Joined: Wed Mar 18, 2015 12:06 pm

Re: New to Redpitaya

Post by kcs » Wed Mar 18, 2015 12:15 pm

Hi...

After changing the trigger source and trigger mode single event triggering is possible...and is very much useful.....
but for multiple trigger what should i have to do???
please provide some information regarding this...

Nils Roos
Posts: 1441
Joined: Sat Jun 07, 2014 12:49 pm
Location: Königswinter

Re: New to Redpitaya

Post by Nils Roos » Thu Mar 19, 2015 9:42 pm

Well, obviously you'd either build a loop into your modified acquire or write a small shell script that calls acquire repeatedly.

If you are programming the loop into the acquire code, you would probably need to rearm the scope by writing 1 to bit 0 in scope register 0x0. You may also need to set the trigger configuration again. I guess calling acquire from a loop in a script is the easier option.

Arnold
Posts: 54
Joined: Wed Mar 11, 2015 3:07 pm

Re: New to Redpitaya

Post by Arnold » Fri Mar 20, 2015 2:21 pm

Hello,

i have some question to the develop environment...

is xilinx SDK officially supported by Redpitaya, which version? Did someone create a project template?
I need some configuration files to run an C/C++ application on the arm core0 (linux) or core1 (bare-metal) ...

Vivado Design Suite is only required for the FPGA, which verison do you support?

Thanks,
A

Arnold
Posts: 54
Joined: Wed Mar 11, 2015 3:07 pm

Re: New to Redpitaya

Post by Arnold » Fri Mar 20, 2015 2:44 pm

seems this was already discussed here: viewtopic.php?f=14&t=364

Nils Roos
Posts: 1441
Joined: Sat Jun 07, 2014 12:49 pm
Location: Königswinter

Re: New to Redpitaya

Post by Nils Roos » Fri Mar 20, 2015 2:52 pm

Vivado + SDK 2013.3 is the recommended version for Red Pitaya development.

I see you already found this thread. For a bare metal application, you would of course use "standalone" in the OS setting instead of linux.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 3 guests