Hi there,
After setup the powersdr software, I tried to powerup the system ... but nothing happens. There is only one message ''No Charly 25 / HAMlab / Stemlab SDR device detected on the network''
Has anybody an advise for me?
Best Regards in Advance
Wilfried
Newbie No SDR device on the network
-
- Posts: 8
- Joined: Mon Mar 28, 2016 7:36 pm
Re: Newbie No SDR device on the network
RP via router/hub or directly connected?
Can you connect to RP at all? (Web browser etc)
For direct connection and if using Pavel's Alpine Image the Red Pitaya IP address is 192.168.1.100, via router/hub the RP should receive an IP via DHCP.
You have to start the "HPSDR-compatible SDR transceiver" via the web interface.
Which PowerSDR version do you use?
If you're using a plain RP (not a C25, HAMlab), I recommend https://github.com/TAPR/OpenHPSDR-Power ... tag/v3.4.9 and set it to HERMES!
Can you connect to RP at all? (Web browser etc)
For direct connection and if using Pavel's Alpine Image the Red Pitaya IP address is 192.168.1.100, via router/hub the RP should receive an IP via DHCP.
You have to start the "HPSDR-compatible SDR transceiver" via the web interface.
Which PowerSDR version do you use?
If you're using a plain RP (not a C25, HAMlab), I recommend https://github.com/TAPR/OpenHPSDR-Power ... tag/v3.4.9 and set it to HERMES!
-
- Posts: 3
- Joined: Sat Nov 17, 2018 12:04 pm
Re: Newbie No SDR device on the network
Hi,
vielen Dank für Deine Antwort. Bin ein blutiger Anfänger. Deshalb gefällt mir Deine Idee besonders gut, zunächst einmal ein RP-Board als Hermes zum Laufen zu bringen... ohne charly25-modul.
Was muss dafür als Software auf die SD-Karte gespeichert werden? Wenn ich es richtig verstanden habe, werden ja nur kleinere Scripte auf der SD-Karte gespeichert und der Rest standardmässig auf der Festplatte des PCs abgelegt.
vy73 aus Mittelhessen. Wilfried
vielen Dank für Deine Antwort. Bin ein blutiger Anfänger. Deshalb gefällt mir Deine Idee besonders gut, zunächst einmal ein RP-Board als Hermes zum Laufen zu bringen... ohne charly25-modul.
Was muss dafür als Software auf die SD-Karte gespeichert werden? Wenn ich es richtig verstanden habe, werden ja nur kleinere Scripte auf der SD-Karte gespeichert und der Rest standardmässig auf der Festplatte des PCs abgelegt.
vy73 aus Mittelhessen. Wilfried
-
- Posts: 8
- Joined: Mon Mar 28, 2016 7:36 pm
Re: Newbie No SDR device on the network
Hello Wilfried,
for further assistance i recommend to create a account on http://forum.cq-nrw.de/
This is the place, not only for german Red Pitaya SDR enthusiasts.
for further assistance i recommend to create a account on http://forum.cq-nrw.de/
This is the place, not only for german Red Pitaya SDR enthusiasts.
-
- Posts: 3
- Joined: Sat Nov 17, 2018 12:04 pm
Re: Newbie No SDR device on the network
Thanks a lot and have a nice sunday
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 90 guests