Hi,
I'm new to FPGA programming. I would like to make a modification in the FPGA code of the Red Pitaya to include a new functionality to control PaP motors. It's possible? Are there any logical blocks to include this code (is it simple)? without modifying any functionality of the Red Pitaya.
Thanks.
Carlos.
FPGA Programming
-
- Posts: 47
- Joined: Fri Apr 17, 2015 7:38 pm
- Location: Richmond, VA, USA
Re: FPGA Programming
Hi Carlos,
There are some awesome tutorials on FPGA programming by Anton Potocnik: http://antonpotocnik.com/?cat=29. I totally rewrote the FPGA code that runs in my RP and load it at the beginning of my program with
If you can get the original Vivado design files for the RP FPGA you can modify that. Or maybe load your FPGA code, use it, then reload the original when done.
Good luck.
John
There are some awesome tutorials on FPGA programming by Anton Potocnik: http://antonpotocnik.com/?cat=29. I totally rewrote the FPGA code that runs in my RP and load it at the beginning of my program with
Code: Select all
system("cat /opt/redpitaya/fpga/UscopeV0.04.bit > /dev/xdevcfg");
Good luck.
John
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 74 guests