FPGA Programming

Applications, development tools, FPGA, C, WEB
Post Reply
Carlos
Posts: 26
Joined: Tue Nov 17, 2015 9:58 am

FPGA Programming

Post by Carlos » Wed Jun 05, 2019 10:02 am

Hi,
I'm new to FPGA programming. I would like to make a modification in the FPGA code of the Red Pitaya to include a new functionality to control PaP motors. It's possible? Are there any logical blocks to include this code (is it simple)? without modifying any functionality of the Red Pitaya.

Thanks.
Carlos.

jmadsenee
Posts: 47
Joined: Fri Apr 17, 2015 7:38 pm
Location: Richmond, VA, USA

Re: FPGA Programming

Post by jmadsenee » Thu Jun 27, 2019 6:09 pm

Hi Carlos,

There are some awesome tutorials on FPGA programming by Anton Potocnik: http://antonpotocnik.com/?cat=29. I totally rewrote the FPGA code that runs in my RP and load it at the beginning of my program with

Code: Select all

system("cat /opt/redpitaya/fpga/UscopeV0.04.bit > /dev/xdevcfg");
If you can get the original Vivado design files for the RP FPGA you can modify that. Or maybe load your FPGA code, use it, then reload the original when done.

Good luck.

John

Carlos
Posts: 26
Joined: Tue Nov 17, 2015 9:58 am

Re: FPGA Programming

Post by Carlos » Tue Jul 02, 2019 12:12 pm

Thanks!!!

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 28 guests