cw skimmer probleme on rp 122/16

Applications, development tools, FPGA, C, WEB
Post Reply
chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

cw skimmer probleme on rp 122/16

Post by chrisdgy » Wed Jun 03, 2020 8:26 pm

Good morning all !
I come to ask your help, because after trying different solutions I still can't get two sessions of cw skimer server to work with the rp 122/16! however, it works well if I use two different sdr (one rsp1) with a skimmer and rp session on another is ok! but impossible to do it on rp in two sessions?
an idea

thank you ! chris

pavel
Posts: 790
Joined: Sat May 23, 2015 5:22 pm

Re: cw skimmer probleme on rp 122/16

Post by pavel » Wed Jun 03, 2020 8:57 pm

Have you followed the instructions at this link?

chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

Re: cw skimmer probleme on rp 122/16

Post by chrisdgy » Wed Jun 03, 2020 9:32 pm

hi Pavel , yes i tryed it ans some oters desciptions i found on internet but nothing work !!!!
the sessions are active like normal but no spots go on the way !!!!

pavel
Posts: 790
Joined: Sat May 23, 2015 5:22 pm

Re: cw skimmer probleme on rp 122/16

Post by pavel » Wed Jun 03, 2020 11:08 pm

I'm afraid I can't help more than that. As far as I know, the instructions in my notes work if they are followed exactly.

chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

Re: cw skimmer probleme on rp 122/16

Post by chrisdgy » Thu Jun 04, 2020 6:36 am

hello Pavel , so i will go to try agn maybe missed some think !
tnx for answers and help !

just a question agn how to switch off commande line the alpilinux or reboot it ??

tnx agn ! have nice day !

chris

pavel
Posts: 790
Joined: Sat May 23, 2015 5:22 pm

Re: cw skimmer probleme on rp 122/16

Post by pavel » Thu Jun 04, 2020 9:01 am

If the Ethernet port of your PC is directly connected to the Ethernet port of your STEMlab 122.88-16 SDR and if the IP address of the Ethernet port of your PC is set to 192.168.1.101, then try to set it to 192.168.1.102 and redo the tests.

192.168.1.101 is used by the additional receiver running on STEMlab 122.88-16 SDR.

chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

Re: cw skimmer probleme on rp 122/16

Post by chrisdgy » Thu Jun 04, 2020 9:39 pm

Tnx Pavel , for information !

I'm connected to a wifi repeter . The RP to repeter via ethernet and répéter to router via wifi .
Windows 7 pc connected to Wi-Fi direct to router
Have A second pc windows 10 connected via wifi to rooter .

It's ok for Win 10 IS work good now ...Can work 2 sessions of skimmer

But impossible on windows 7 when doing same procédure .... Realy i d'ont undestand why

I looking for Windows 7 solution because it's thé computer i use for radio ....
Si Hope found solution !!

Chris

chrisdgy
Posts: 24
Joined: Thu May 28, 2020 11:19 am

Re: cw skimmer probleme on rp 122/16

Post by chrisdgy » Tue Jun 09, 2020 5:02 am

hello Pavel
I forgot to report here that now everything works normally here under window 7

since i put the RP on an access point it works perfectly well.

chris

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 21 guests