Can't get list of applications.
-
- Posts: 2
- Joined: Fri Feb 03, 2017 2:28 am
Can't get list of applications.
I just got my RP. Took a few tries to get it to work, but then I got the front page with the list of applications.
Played with the scope/siggen for a bit and signals up to a few MHz worked very well. I shut down (using sudo halt), and restarted later. When I try to connect to the RP again the "Getting the list of applications" screen comes up with the little twirlies and never gives me the list of applications. I can get it to work again by flashing a new OS, but then after playing around a bit the same thing happens.
I can ssh into the RP, I can ping it, I can ping from the RP to my local network or the Internet, but my applications never come back.
Any hints?
Bob
Played with the scope/siggen for a bit and signals up to a few MHz worked very well. I shut down (using sudo halt), and restarted later. When I try to connect to the RP again the "Getting the list of applications" screen comes up with the little twirlies and never gives me the list of applications. I can get it to work again by flashing a new OS, but then after playing around a bit the same thing happens.
I can ssh into the RP, I can ping it, I can ping from the RP to my local network or the Internet, but my applications never come back.
Any hints?
Bob
-
- Posts: 1441
- Joined: Sat Jun 07, 2014 12:49 pm
- Location: Königswinter
Re: Can't get list of applications.
I never had that, and I can't reproduce it. What OS release are you currently using?
-
- Posts: 2
- Joined: Fri Feb 03, 2017 2:28 am
Re: Can't get list of applications.
Thank you for replying!
I am running 0.96-20. I have two SD cards, the one that came with the system that enabled my two purchased instruments and upgraded using the browser to whatever the latest OS is, and a second to which I flashed a recently downloaded image. Both do the same thing.
This is pretty strange. I feel, without good reason, that it is some kind of networking issue. I am using google-chrome on a debian linux system (testing), but see the same thing from Windows 10 using Chrome and from linux using firefox. I was never able to connect using the instructions so I just use the IP address (192.168.1.xx). As I said, I can ssh in, ping all over the place so it isn't a connectivity thing. I do have two access points in my network, but the second one *shouldn't* be interacting with this. I use DHCP from the primary access point to set the IP address. Some more details
If I reflash the OS, I can proceed with running applications. But when I use the back arrow in the application OR the browser's back button the fool thing hangs. I can connect directly to the application using the URL for the application itself (e.g. http://192.168.1.xx/scopegenpro/?type=run) and everything is fine.
I am sure I am some kind of corner case. I am reasonably linux literate, so if there are things I can do to help figure this out so nobody else gets bit I am happy to do so. In the mean time I figured out how to use my RP so all is well, if a little inconvenient.
Bob
I am running 0.96-20. I have two SD cards, the one that came with the system that enabled my two purchased instruments and upgraded using the browser to whatever the latest OS is, and a second to which I flashed a recently downloaded image. Both do the same thing.
This is pretty strange. I feel, without good reason, that it is some kind of networking issue. I am using google-chrome on a debian linux system (testing), but see the same thing from Windows 10 using Chrome and from linux using firefox. I was never able to connect using the instructions so I just use the IP address (192.168.1.xx). As I said, I can ssh in, ping all over the place so it isn't a connectivity thing. I do have two access points in my network, but the second one *shouldn't* be interacting with this. I use DHCP from the primary access point to set the IP address. Some more details
If I reflash the OS, I can proceed with running applications. But when I use the back arrow in the application OR the browser's back button the fool thing hangs. I can connect directly to the application using the URL for the application itself (e.g. http://192.168.1.xx/scopegenpro/?type=run) and everything is fine.
I am sure I am some kind of corner case. I am reasonably linux literate, so if there are things I can do to help figure this out so nobody else gets bit I am happy to do so. In the mean time I figured out how to use my RP so all is well, if a little inconvenient.
Bob
-
- Posts: 2
- Joined: Fri Jun 05, 2015 10:47 am
Re: Can't get list of applications.
Hello,
I am getting the exact same behavior on OS 0.96-86. (I can connect directly to the application using the URL for the application itself, but otherwise the RP is hanging "Getting the list of applications").
I am on Win10, getting the same behavior via Access Point mode or Direct Ethernet cable connection. In Access Point mode I am able to access the internet on the PC through the RP (static IP LAN). However if I go into //192.168.128.1/updater/ I get a "Your RedPitaya currently offline..." message.
Kind regards,
Tomas
Update: updated to 0.97, everything working correctly...
I am getting the exact same behavior on OS 0.96-86. (I can connect directly to the application using the URL for the application itself, but otherwise the RP is hanging "Getting the list of applications").
I am on Win10, getting the same behavior via Access Point mode or Direct Ethernet cable connection. In Access Point mode I am able to access the internet on the PC through the RP (static IP LAN). However if I go into //192.168.128.1/updater/ I get a "Your RedPitaya currently offline..." message.
Kind regards,
Tomas
Update: updated to 0.97, everything working correctly...
Last edited by tfoldes on Thu Mar 09, 2017 10:38 am, edited 1 time in total.
-
- Posts: 1
- Joined: Thu Mar 09, 2017 3:40 am
Re: Can't get list of applications.
I just received my Red Pitaya and first things first, apps appeared. The update also appeared and I installed. Then I get the circling lines of death.... Anyone know how to fix this?
UPDATE:
I noticed the version.txt file that was preinstalled on my SD card says OS version 97. The update I installed was the 96.86.
Could this be an issue?
UPDATE:
I noticed the version.txt file that was preinstalled on my SD card says OS version 97. The update I installed was the 96.86.
Could this be an issue?
-
- Posts: 12
- Joined: Mon Feb 13, 2017 10:18 am
Re: Can't get list of applications.
I have the same problem. Everything was working correctly, I updated the Os, unlocked the apps and since the RP has been stuck getting the list of applications every time I try.
I have no idea what to do about this.
Has anybody had any luck?
I have no idea what to do about this.
Has anybody had any luck?
- redpitaya
- Site Admin
- Posts: 912
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Can't get list of applications.
Hi,
please try to clear browser cache, this should solve the problem.
kind regards, Red Pitaya team
please try to clear browser cache, this should solve the problem.
kind regards, Red Pitaya team
-
- Posts: 5
- Joined: Sun Nov 11, 2018 9:11 am
Re: Can't get list of applications.
I'm still seeing this problem, even after clearing my browser cache.
Very annoying - I can't use my RP - most of the time.
I can always connect via USB serial, and I see that the RP has an IPv4 address (192.168.x.x). I can ping my host PC from the RP, and ping the RP from my PC. However I can't see the RP as a web server, and cannot SSH into it.
Occasionally, something mysterious happens (I don't know what) and I can do both.
All help gratefully received!
- B
Very annoying - I can't use my RP - most of the time.
I can always connect via USB serial, and I see that the RP has an IPv4 address (192.168.x.x). I can ping my host PC from the RP, and ping the RP from my PC. However I can't see the RP as a web server, and cannot SSH into it.
Occasionally, something mysterious happens (I don't know what) and I can do both.
All help gratefully received!
- B
-
- Posts: 5
- Joined: Sun Nov 11, 2018 9:11 am
Re: Can't get list of applications.
...update: I can also SSH from RP to PC.
So what might prevent SSH from PC to RP?
- B
So what might prevent SSH from PC to RP?
- B
-
- Posts: 5
- Joined: Sun Nov 11, 2018 9:11 am
Re: Can't get list of applications.
Fixed by rewriting SD card.
This time, I remembered to umount before the dd!
This time, I remembered to umount before the dd!
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 122 guests