I notice that the Bode plot is showing crazy results at certain frequency ranges. Using the standard calibration setup I am getting jumping amplitude and phase at these ranges (see attached plot):
17 - 27 MHz
47 - 51 MHz
53 - 56 MHz
Is this known behaviour and are there any workarounds for this problem ?
I tried both the Bode plotter app that come with the RedPitaya and the one on the Marketplace. Both show the same distortions.
Bode plotter: huge distortions at certain frequencies
-
- Posts: 2
- Joined: Sat Apr 07, 2018 7:49 pm
Bode plotter: huge distortions at certain frequencies
You do not have the required permissions to view the files attached to this post.
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Bode plotter: huge distortions at certain frequencies
Please give more details on what you are measuring and how.
This shows how it should look and work https://www.redpitaya.com/f136/bode-analyzer
at the same time , more details you can find in this documentation https://redpitaya.readthedocs.io/en/lat ... light=bode
It seems you might have some pins set up the wrong way, we will see.
In the case you cannot share details here, please hit me up on support@redpitaya.com
This shows how it should look and work https://www.redpitaya.com/f136/bode-analyzer
at the same time , more details you can find in this documentation https://redpitaya.readthedocs.io/en/lat ... light=bode
It seems you might have some pins set up the wrong way, we will see.
In the case you cannot share details here, please hit me up on support@redpitaya.com
-
- Posts: 4
- Joined: Tue Oct 06, 2020 1:20 pm
Re: Bode plotter: huge distortions at certain frequencies
I have the same problem with the STEM 125-14 v1.0 (OS 0.99-48).
I want to measure a LPF, but when calibrating it already goes wrong.
According the manual I connect IN1, IN2 and OUT1 together with the jumpers in the LV position.
The result of the calibration run is attached as well.
What do I do wrong?
I want to measure a LPF, but when calibrating it already goes wrong.
According the manual I connect IN1, IN2 and OUT1 together with the jumpers in the LV position.
The result of the calibration run is attached as well.
What do I do wrong?
-
- Posts: 7
- Joined: Wed Sep 23, 2020 9:54 am
Re: Bode plotter: huge distortions at certain frequencies
Hi,
You may have to add a 50ohm in front of the ADC.
You may have to add a 50ohm in front of the ADC.
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Bode plotter: huge distortions at certain frequencies
Yes, please add 50Ohm terminations via a T-sma connector on IN1 and IN2
- redpitaya
- Site Admin
- Posts: 901
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Bode plotter: huge distortions at certain frequencies
Black Friday 2020 is here!
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 37 guests