Manual calibration

Just about everything about Red Pitaya
Post Reply
fgeorgy
Posts: 4
Joined: Sun Mar 20, 2016 6:58 pm

Manual calibration

Post by fgeorgy » Sun Oct 30, 2022 3:43 pm

Hi,

I'm trying to calibrate my RP but since I don't have a 0.5V reference available and I never use the LV range, I was wondering if it is possible to only calibrate the HV range.

I tried with the manual calibration but I can't get to something usable and am not sure of doing it right.

Does anybody know how to use the manual calibration procedure?

User avatar
redpitaya
Site Admin
Posts: 883
Joined: Wed Mar 26, 2014 7:04 pm

Re: Manual calibration

Post by redpitaya » Wed Nov 23, 2022 10:34 pm

Hey,

Sorry for the late reply.

You can use some sort of a resistor divider to achive the wanted voltage (0.5 Volts) if you have a higher voltage source. That could solve your problem.

The calibration currently does not support calibration for only one voltage range.

nuyte
Posts: 1
Joined: Wed Dec 21, 2022 10:04 pm
Location: Australia
Contact:

Re: Manual calibration

Post by nuyte » Mon Dec 26, 2022 4:53 pm

Hi,

If you are trying to calibrate your RP but since you don't have a 0.5V reference available and you never use the LV range, yes you can calibrate the HV range. And I believe it is correct.
Thanks! I usually work on furniture.
Last edited by nuyte on Sat Dec 31, 2022 4:39 pm, edited 1 time in total.

User avatar
redpitaya
Site Admin
Posts: 883
Joined: Wed Mar 26, 2014 7:04 pm

Re: Manual calibration

Post by redpitaya » Tue Dec 27, 2022 8:52 am

nuyte wrote:
Mon Dec 26, 2022 4:53 pm
Hi,

If you are trying to calibrate your RP but since you don't have a 0.5V reference available and you never use the LV range, yes you can calibrate the HV range. And I believe it is correct.
Thanks! I usually work on furniture.
Sorry, this is not correct!

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: Google [Bot], pavel and 28 guests