Hi everyone! I am a complete novice in FPGA and embedded system so please forgive me if my question seems elementary.
My laboratory recently bought a STEMlab 125-14 4 input red pitaya board and would like to use it for pulse height analysing purpose. Pavel's MCPHA fits the purpose well, but I was told that his application does not run on our specific board, so I will have to find an alternative.
I tried the LED blinker example and it worked. So my guess is that for there might exist a similar project for the "Oscilloscope" project as well, where I can find codes and IP designs for the oscilloscope application and make some changes to it. However, I tried searching on Google and have no luck. Can anyone point me to the project code? Or it is confidential?
I imagine it can be launch by the "make project PRJ=v0.94 MODEL=Z20_4" command or similar?
Thank you!
The FPGA code for RedPitaya Oscilloscope application
-
- Posts: 2
- Joined: Thu Jan 18, 2024 11:13 am
-
- Posts: 113
- Joined: Tue Nov 16, 2021 11:38 am
Re: The FPGA code for RedPitaya Oscilloscope application
All of the Red Pitaya FPGA code is available on our GitHub.
https://github.com/RedPitaya/RedPitaya-FPGA
more specifically, the oscilloscope app sources are available here:
https://github.com/RedPitaya/RedPitaya- ... /prj/v0.94
and here:
https://github.com/RedPitaya/RedPitaya- ... tl/classic
For your board, this command will open all of the sources in Vivado's GUI.
https://github.com/RedPitaya/RedPitaya-FPGA
more specifically, the oscilloscope app sources are available here:
https://github.com/RedPitaya/RedPitaya- ... /prj/v0.94
and here:
https://github.com/RedPitaya/RedPitaya- ... tl/classic
For your board, this command will open all of the sources in Vivado's GUI.
Code: Select all
make project PRJ=v0.94 MODEL=Z20_4
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 5 guests