new red pitaya with inductor 223D broken off

Placement, modules, components and accessories; the ones that exist and the the nice-to-be's
Post Reply
hstrey
Posts: 1
Joined: Thu Nov 15, 2018 7:09 pm

new red pitaya with inductor 223D broken off

Post by hstrey » Thu Nov 15, 2018 7:17 pm

I just received the Red Pitaya STEM 125-14 Diagnostic kit. When I opened the box, I found the Red Pitaya lying in the box, and I immediately noticed that one of the electronics parts was loose. I identified it as an inductor 223D that is next to the memory chip.

Here is my question. Is the board still functioning without this inductor, or should I get a replacement? I suspect that it was knocked loose in transport. It was just lying in the box with the aluminum cases and other stuff.

Should I attempt to resolder the inductor? I have a hot air station and microsoldering capabilities.

Hope you can help me.

amike88
Posts: 89
Joined: Tue Mar 29, 2016 7:41 pm

Re: new red pitaya with inductor 223D broken off

Post by amike88 » Tue Nov 20, 2018 12:27 pm

Hi,

if you have the capability to solder it back up, I see no reason not to do it.

Test the board and if it works Ok you're done.

Otherwise just ask for a new one.

Post Reply
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie

Who is online

Users browsing this forum: No registered users and 0 guests