Use multiple RPs
-
- Posts: 2
- Joined: Wed Jun 18, 2014 9:37 pm
Use multiple RPs
Can you use 2 or more RPs together and sync the 2 boards. In effect have a 4 channel system
-
- Posts: 67
- Joined: Wed May 28, 2014 12:15 pm
Re: Use multiple RPs
Would you like to sync. ADC clocks or only triggering of the acquisition?
- redpitaya
- Site Admin
- Posts: 926
- Joined: Wed Mar 26, 2014 7:04 pm
Re: Use multiple RPs
If you already have an external trigger signal you could simply trigger the acquisition on both Red Pitayas simultaneously through external trigger input that is available on the extension connector. On the other hand it would be also possible to define triggering conditions (input, edge, threshold) on the first Red Pitaya and sync. it over SATA connector with second Red Pitaya. In such case the second Red Pitaya would probably have another trigger source called SATA or similar. This second feature would be the best solution I think, but unfortunately it is not yet implemented.
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 11 guests