We are exploring the options for exporting the ADC clock from one Red Pitaya to the Ext. clck. +/- input pins of another Red Pitaya, that is pins 23-24 on E2 connector.
There's an old forum thread that touched upon this question - viewtopic.php?t=1012
One suggestion there is to drive clock-capable pair of pins, e.g. DIO3 P and N with the 125 MHz clock signal, but it does not mention the proper constraints.
There's a couple of clock output examples in the official github, e.g adc_clk_o is configured with LVCMOS18 single-ended standard and is driven with a pair of ODDR primitives. On the other hand, dasy_o clock is configured with DIFF_HSTL_I_18 standard and is driven with a OBUFDS primitive respectably.
Do you happen to have any recommendations?
We also tested the new click shield, which works fine as a clock source, but presented some issues with asynchronous triggering, so we are exploring the alternatives.
Output clock constraints
jadalnie klasyczne ekskluzywne meble wypoczynkowe do salonu ekskluzywne meble tapicerowane ekskluzywne meble do sypialni ekskluzywne meble włoskie
Who is online
Users browsing this forum: No registered users and 1 guest